POLYFORT FPP 40T LE K2274 GRY61465

LyondellBasell

Description

40% talc-filled PP-Homopolymercompound, low emission and low odour

Availability

Africa-Middle East, Asia-Pacific, Europe, Latin America, North America

Legend

SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Volume Flow Rate (230 °C/2.16 kg) 8.0 cm³/10 min
Density (Method A) 1.25 g/cm³
Tensile Modulus (1 mm/min, Type 1A) 4000 MPa
Tensile Stress at Break (Type 1A, 5 mm/min) 30.0 MPa
Tensile Strain at Break (Type 1A, 5 mm/min) 3.5 %
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) 2.5 kJ/m²
Charpy Impact Strength - Notched (-30 °C, Type 1, Edgewise, Notch A) 1.8 kJ/m²
Charpy Impact Strength - Unnotched (23 °C, Type 1, Edgewise) 20 kJ/m²
Charpy Impact Strength - Unnotched (-30 °C, Type 1, Edgewise) 11 kJ/m²
Vicat Softening Temperature (A (10N), 50 °C/h) 155 °C
Vicat Softening Temperature (B (50N), 50 °C/h) 90.0 °C
Deflection Temperature Under Load Unannealed (0.45 MPa) (Flatwise) 130 °C
Deflection Temperature Under Load Unannealed (1.80 MPa) (Flatwise) 90.0 °C
Burning Rate (2.00 mm) 48 mm/min
Burning Rate (2.00 mm) 48 mm/min
Drying Time 2.0 to 3.0 hr
Drying Temperature 80 °C
Processing (Melt) Temp 220 to 260 °C
Mold Temperature 30 to 60 °C
Flame Rating (1.5 mm) HB
Flame Rating (3.0 mm) HB
Flammability Classification (1.5 mm) HB
Flammability Classification (3.0 mm) HB

Process

Injection Molding


Resin

Polypropylene, Homopolymer